Instagram story viewer> @stancechasers> Posts
StanceChasers™(@stancechasers)'s profile avatar HD Profile

StanceChasers™

@stancechasers

2.2K
followers
0
following
Chasing the best stanced cars, so you don't have to and more...
#StanceChasers
👇🏾Please Subscribe👇🏾
POSTS STORIES REELS
⚠️Don’t work with @mookeeh.mk1⚠️ Long story short, I usually use a different company to get my custom camber plates. I wanted to give @mookeeh.mk1 a chance because it looks like they make decent products and where nice when I spoke to them. They agreed to help me out and we started the process. I sent them measurements, they sent a few prototypes over the weeks and I would take my car apart and test them. Ones we finally got to the “final version”, I got the plates and tried to installed them. One stud was off, the tolerance of the reinforcement plates that comes on the car is a lot smaller then the strut tower. The plate would fit thru the strut tower but not the reinforcement plate. I still tried to make it work so I removed the stud that was off and installed them. I ran into another problem. The studs where too short. I would have like 2-3 threads on the nut (extremely unsafe) apart from the fact that the bearing I got with the plates sucked. All these problems where easily fixed, I just need to get longer studs, only run 4 out of the 5 and use my old bearing because those where better quality. I decided to send them back because I wanted them to get the product right since I know they would continue to sell it to customers. They asked for my old camber plates with the ones they made for me. I told them I would send the reinforcement plate because that’s the part with the tightest tolerance and the one that’s stoping it from working plus I didn’t want to have my car on jack stands. I shipped them over and they finally got back to me about 3 weeks later, even though I would try to get in contact almost everyday after delivery. mind you this whole time we are doing this I’m rebuilding my 3 piece wheels to fit with the new camber plates. They asked for my camber plates and I explain to them everything again and that only needed longer studs and for the one studs to be fixed to fit the reinforcement plated. No need for my car to be on jack stand for weeks. Is not like they would get to it right away if I sent them. They decided to junk the camber plates and refund me my money but they have the plates on their website for $500 dollars now. by @stancechasers
The daily at Gat! #StanceChasers - - - #f80 #M3 #gat #gatlinburg by @stancechasers
Todos los día le doy gracias a dios no importa que tan mal esté porque venimos de abajo! #StsnceChasers - - - #bmw #f80 #m3 #gat by @stancechasers
It’s been a while since I posted. Had this car for over a year😅 #StanceChasers by @stancechasers
Missing the good weather…. #StanceChasers - - - #bmw #m3 #f80 #te37 #gat #bagged #volkracing by @stancechasers
Some unreleased footage from one of the shooters. #StanceChasers - - - #y33 #cima #gat #static #gatlinburg by @stancechasers
F80 was everywhere! #StanceChasers - - - #F80 #M3 #bmw #cambered #gat #gatlinburg by @stancechasers
Vibing at gat. #StanceChasers - - - #static #gatlinburg #civic #bmw by @stancechasers
#F80 are great cars but at the same time mid. #StanceChaser - - - #bmw #f80 #m3 #camber #static #bagged #gat #gatlinberg by @stancechasers
Paying the boat #StanceChaser - - - #bmw #static #gatlinburg #cambered #gat #340 by @stancechasers
Tunnel vision👁️ #StanceChaser - - - #static #gatlinburg #gat #cambered #lexus #gs400 by @stancechasers
How to Corolla! #StanceChasers - Tag the owner - - #gatlinburg #static #cambered #toyota #corolla by @stancechasers

Download All

Save the photos and videos currently loaded on this page.

0Photos
0Videos
Ready to download 0 / 0

Keep this tab open until your download is ready.
back to up