#diffsonline
Coils, Ceramic plug wires, DEI plug boots and EGTs are in. Might try a 90 deg plug wire on #7 cyl. Any better ideas?
@gridlifeofficial
@kdmtuners
@teamtoyousa
@neotech_usa
@liquimoly
@konigwheelsusa
@antigravitybatteries
#e36 #gridlife #ls3 #zf8
Nicks been busy chipping away at a few projects for the build. Added AN fitting to VC for vacuum regulation, filling unused ports. Stole the idea from @seemslegitgarage and added a site tube to the oil tank. Also upgraded to m3 spindles and added roll center / bumper steer correction.
@gridlifeofficial
@kdmtuners
@neotech_usa
@liquimoly
@konigwheelsusa
@antigravitybatteries
#e36 #gridlife #ls3 #8hp70 #zf8
The transmission brace didn’t fit, nothing a cut off wheel couldn’t fix.
@gridlifeofficial
@kdmtuners
@neotech_usa
@liquimoly
@konigwheelsusa
@antigravitybatteries
#gridlife #e36 #zf8 #8hp70 #ls3
Upgrading the brake master and booster from a E46 M3
#e36 #gridlife #ls3 #zf8 #8hp70
EGT in every runner? Sure why not. @stablers_hairplugs always making it happen
@gridlifeofficial
@kdmtuners
@neotech_usa
@liquimoly
@konigwheelsusa
@antigravitybatteries
#e36 #gridlife #ls3 #zf8 #8hp70
The E36 gets a new dual fuel pump setup with fuel level sensors. Not having a fuel gauge in the past was annoying so happy to actually have a fuel gauge now.
@gridlifeofficial
@kdmtuners
@neotech_usa
@liquimoly
@konigwheelsusa
@antigravitybatteries
#e36 #gridlife #ls3 #8hp70 #zf8
We FINALLY install Coilovers onto the E36 Track Build!!!
We chose @maxpeedingrods New T7 Style Coil-overs for a balance between budget friendly & amazing design quality, the handling is honestly perfect and I’m absolutely stoaked to see how reliable they are!!!
Not only did we install the coil-overs but we also fixed the issues with dead spots in my clutch by replacing the slave cylinder with a brand new fte one & replaced the slave cylinder line with a upgraded @ecstuning slave cylinder line & there adjustable clutch stopper! We also got around to flushing the trans fluid & upgrading the trans mounts to @revshift 95A poly trans mounts.
Stay tuned for the next part as we take it on a bit of a road trip to test our build quality & don’t forget to out my YouTube for longer content!!! (Link in bio)
#bmw #e36 #coilovers #maxspeedingrods #ecstuning
Picked up an E46 subframe and somehow made it fit in the back of an X3 without destroying the interior💀
Over the next few days it’s getting fully refreshed — aluminum + poly bushings all around, fresh lower control arms, camber arms, everything dialed in and ready to handle what’s coming next.
No shortcuts, just building it right the first time.
Stay tuned… this setup is about to change everything 🔧🔥
#E46Build #BMWDrift #formuladrift #DriftBuild #GarageBuild
When you have an E46, the floor is dropped an inch or more below the gas pedal and uneven so floor pans are the solution to fix that problem. Ours needed to be a little modified after the cage went in. There were also some misbehaving rivnuts involved. Coming next is the custom firewall! 🔥 #bmw #modified #mechanic #drift
I went with @maxxecu engine management for the LS / 8HP. This will allow tuning both the 8HP and LS in one place.
#gridlife #e36 #ls3 #zf8 #8hp
Vacuum leak fix👍 #drift #e46 #formuladrift #gridlife #bmw
We got busy in the unit, my brothers E36 gained an engine upgrade 👀 Vxr is in ready for the air ride install and other parts. Active Antics 👀 follow the page to stay tuned with the builds ✌🏻
#e36 #bmw #vxr #engine #projectcar
