Instagram story viewer> @3dip_dip> Posts

Printări 3D personalizate

@3dip_dip

1.2K

followers

190

following

Follow the journey of Theseus's Ender 3, when the frame is only OEM, but the print quality is as 'good' if not worse than the original

POSTS STORIES REELS

Making a 20V to 5V adapter for my Tapoo camera and Parkside X20V battery with an LM2596ADJ adjustable voltage regulator. Unfortunately this setup has no drainage protection, so it will suck my battery dry, but the next version will be drainage proof 😁😁 by @3dip_dip

I am presenting a simple method to improve your Ender 3's first layer. Since I showed this clip I have no problems with the first layers 🤔🤔 by @3dip_dip

Day 3 of printing bricks until somebody finds out what I'm building.

Today I printed 12 pieces, 2.3 hours. I have found some tweaks that enables me to print faster in the same quality (namely I managed to find a good line width/height ratio and adjusted the flow to 105%).

See you tomorrow by @3dip_dip

New technology: wireless warping printing for the better quality and quantity. Maybe Ender is tired. by @3dip_dip

What's wrong with you Endi? I believe it transitioned to a sewing machine 😅😅
Also failing prints as me as usual.... by @3dip_dip

When you have a broken phone back, a 3d printer, access to a caliper, a tablet with a stylus pen, wuweido (cause you're cheap and you don't pay for apps), and free will 😅😅

Ps: this is my best transition yet
Ps2: the model became small, it needs to be 2mm longer, the camera island should be 5mm higher but the camera positions on the island are good at least 😅😅 by @3dip_dip

I might've hit the toolhead with a roll of filament.... by @3dip_dip

I broke my phone's back panel a while ago. Until now a piece of wrap took it together, but unfortunately the dust started to annoy my camera lenses and my phone couldn't focus anymore...

So I did the thing that every broke DIY-er would do, ordered a knockoff AliExpress back panel and changed it 😀😀 the process is easy. Take off the old one, clean the glue, place the new one on, mess up, take off, clean the glue, buy a two sided tape, glue it back, realize that it's ugly, take off again, do it again, now cut the glue to the shape of the frame, insert back, realize one layer is too thin, so no adhesion, take off, put 2 layers, post the video, get 3 likes and 175 unfollows. by @3dip_dip

Printing something ultra fast.

Guess what went wrong after this? I can give you a hint, that it's about the filament, that is super wet and old and tends to break whenever I leave the printer alone for 3 sec by @3dip_dip

I have spoken 😎😎

Also I am amazed how easily have the supports broke off. Not 100% came off, but they came off easily

** - I might not print anything, based on the following: if the print abuses my printer, or uses, or my printer cries, or if he isn't in the mood, or just it's Tuesday I preserve the right to not print anything, or to pick any other comment, but I might pick the second also 🤔🤔 also I'm willing to waste exactly 125.27 mm of filament on this 😅😅 by @3dip_dip

I wanted to post a reel about how awesome engineering skills I have, and how I managed to design and build a 20V to 12V battery adapter. I had some voltage stepdown modules hanging around but I totally forgot that their output peak current is rated to 3A for a short time and 1.8A nominal... Sooo guess what happened, when my tool drained 15A nominal?

Kaboom 😅😅 for a brief second I thought that the tool went kaboom, but luckily not.

At this point I'm waiting for links in PM for any stepdown module that can handle 20-25A starting current and 15A nominal current 😅😅 by @3dip_dip

So I found this really old spool of filament. I bought it like 3 years ago, it was in a simple bag since, and I tried to print something, but it turned out hideously ugly. Then I tried to print a temp table to find the good hotend temperature, and around 180 °C it started not to fail 😅😅 should I still use it or should I throw it away?

Also I'm curious what would happen if I would use a filament dryer. Does someone have one hanging around that can send it to me? 🤔🤔 by @3dip_dip