Instagram story viewer> @btunedperformance> Posts
BTuned(@btunedperformance)'s profile avatar HD Profile

BTuned

@btunedperformance

5.6K
followers
2962
following
|Ecutek|Uprev|HPTuners|VFTuner|2wdDynojet💨 Remote🌍 Parts⚙️/ Installs🔧/ Circuit&Drag Nissan¥Infiniti¥BMW¥Lexus¥Mustang¥Chevy
POSTS STORIES REELS
Preventative maintenance and needed service, we got you covered! A huge thing our clients love about us is that while we are doing the work/upgrades you had in mind, we check over to make sure we catch anything before it happens and tackle it while we are in the area. Sometimes we have to order upgraded parts if there’s something like a special color hose you want, but we stock a variety of parts to keep your wait time down. While doing gallery gasket & water pump job on the G37 we found a few concerns with the coolant hoses showing signs of needing to be changed. We also took care of the pesky heater core hose barb with a metal upgrade to make sure he doesn’t get stranded! While we’re on the coolant topic, this Q50 has upgraded hoses already, though we can only assume someone was a little rough when they installed them and cracked the radiator neck without knowing. We got the client a new radiator, installed it properly and finished up with a dyno tune and TCM tune on his VR30 trans swapped 3.7. •••• by @btunedperformance
Using our nitrousexpress fill station we are your local Nitrous fill location! From 1 pound bike bottles, standard 10lb or the big 20lb bottles, we got you covered! For $9.95/per pound, message us to refill your adrenaline, NOS, nitrous(whatever you fancy to call it) bottles. We also offer Nitrous Express kits, installation and tuning! •••• We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house! ••••• Message us on any of our social media accounts 📲or💬 407.334.3419 📧BTuned.sales@gmail.com by @btunedperformance
This G35 sedan came in to find a new local mechanic he could trust and for an inspection to keep his original engine and trans G running that much longer. We did find a couple concerns but nothing major to stop them from driving it. We performed an oil change and let the customer know what was wrong and provided them with a quote. On the other side of the spectrum, this 03 350z has to be one of the cleanest examples of a daily driven stock DE. We performed a trans and diff fluid service as the customer was unsure when it was ever done before, does a lot of high way driving and wanted to make sure it was healthy as he reaches closer to 100k miles. We are your trusted mechanic and performance shop for all of your vehicles while being Nissan/Infiniti specialists! •••• We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house! ••••• Message us on any of our social media accounts 📲or💬 407.334.3419 📧BTuned.sales@gmail.com by @btunedperformance
Using our nitrousexpress fill station we are your local Nitrous fill location! From 1 pound bike bottles, standard 10lb or the big 20lb bottles, we got you covered! For $9.95/per pound, message us to refill your adrenaline, NOS, nitrous(whatever you fancy to call it) bottles. We also offer Nitrous Express kits, installation and tuning! •••• We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house! ••••• Message us on any of our social media accounts 📲or💬 407.334.3419 📧BTuned.sales@gmail.com by @btunedperformance
Custom AC lines finished up on this VR30 swapped 350z with 100% hold and no leaks 🥵 This 7AT VR30 swap has been a gift that just keeps on giving but we appreciate the support and trust from Dean to get it done. We have a few more things to wire for the AC and with a little magic from Chris Scott we should get the AC finished and car ready for final delivery. If this was a race car and not a daily driving 7AT, electric power steering, factory AC and Air to air kit, this swap is easily 5 times easier 😂. •••• We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house! ••••• Message us on any of our social media accounts 📲or💬 407.334.3419 📧BTuned.sales@gmail.com by @btunedperformance
+115WHP & +162WTQ on this 3.0 with 2 power adders and 1 cooling mod. That’s right, this car still has stock cats! AMS 80mm intakes Heat exchanger 2.5 inch catback exhaust ⛽️93 Octane 📈425WHP & 471WTQ🦍 Transform your VR powered Q50/60 or Z with our custom calibration using EcuTek Technologies Ltd by @btunedperformance
Q50 3.7 came in for the werks. With ISR Longtube headers and off brand catback this Q needing some breathing mods. We did our 3 inch intakes, Z1 Ported upper plenum and delivered a very strong power band on this 3.7 using EcuTek Technologies Ltd software. Making over 300whp from 6000RPM and 272wtq down low on 93 octane this isn’t your average 3.7! We did install upgraded injectors as well and planned to do runs on E85, but unfortunately the car was hit pretty bad 😭 ⛽️93 Octane 📈334WHP & 272WTQ🦍 by @btunedperformance
Q60 came in for our Flex fuel kit and EcuTek Technologies Ltd Flex calibration Z1 Intakes & catted FDP Boosted6 Heat exchanger MBRP Catback BTP CAN Flex fuel kit(Standard kit w/Filter) ⛽️93 Octane 📈447WHP & 515WTQ🦍 🌽E30 📈482WHP & 553WTQ🦍 by @btunedperformance
VR30 Q50 with VRX70s 🔥 This Q50 has been coming to us for some time now and SpeedDemon decided it was time for the next stage in his journey. We installed the VRX70s, High pressure fuel pump, AMS Stage 2 injectors, Fuel pressure sensor, 80mm intakes and NonStopTuning pulley kit. Our fabricator got to work welding flanged for BOV on the AMS Intercoolers and our full 3 inch downpipes with 12 inch resonators. While he thought it had an upgraded Low pressure fuel pump, we quickly found out it did not! Maxing out the stock low pressure side at a little over 600whp on E65, we quickly got to work on the ultimate single pump stock housing upgrade. After performing our BTP Hi-Flow LPFP upgrade with billet top hat, Holley hydramat and PRIDE extended pickup to prevent fuel cuts and walbro 485 paired with a relay kit. Just like that another 700+WHP Q on the road. ⛽️93 Octane 📈532WHP & 482WTQ🦍 🌽E65+ 📈723WHP & 576WTQ🦍 by @btunedperformance
Not all shops are equal and you can trust us to get it right for you! We are Nissan/Infiniti specialist but we work on many other makes/Models as well. We can perform regular maintenance and repairs on just about anything and even major repairs from engine and transmission replacements. We apply the same precision and car to everything we work on! Doing valve covers on a 3.7 that were apparently done before, we found them to be done incorrectly and would explain not only the leak, but concerns the client had about its operation. Luckily we were able to replace the coil pack with a good used one we had in stock and finish the job the right way, the first time. After doing our full gallery gasket & water pump service we pressure test the cooling system and right away we saw a concern. Upon further investigation we found a leaking coolant hose for the Throttle body and at the outlet for that circuit. We performed a throttle body coolant delete bypassing this system with a new hose and clamps. Overall performance increase though small and solving the problem. VR30 owners note the debris we found when changing out the solenoid and installing a Pride solenoid delete plate, keeping the system in high pressure mode. The debris could have ultimately clogged the solenoid leaving it in a low pressure demand state and causing failure to this engine. by @btunedperformance
Not all shops are equal and you can trust us to get it right for you! We are Nissan/Infiniti specialist but we work on many other makes/Models as well. We can perform regular maintenance and repairs on just about anything and even major repairs from engine to transmission replacements. We apply the same precision and care to everything we work on. •••• We have the tools and knowledge to get you where you want it to be with parts, installs, fabrication and tuning all done in house! ••••• Message us on any of our social media accounts 📲or💬 407.334.3419 📧BTuned.sales@gmail.com by @btunedperformance
“The car feels & sounds amazing while driving so smooth” is what this Boosted G35 coupe said after we upgraded their watergate with a quality Turbosmart Gen V and RacePort BOV. This rev9 turbo kit we did over 3 years ago wanted update his system after fixing a misfire and adding a Greddy boost controller. Although this isn’t our ideal placement for a dump tube, this is where the client opted for its location being a show car first. We got the Blow off valve & watergate lined up to the customers existing location and all strapped up. First tuned on wastegate and then turned up for when he wants a bit more fun. 6 PSI wastegate spring 📈322WHP & 296WTQ🦍 10 PSI using Greddy boost controller 📈389WHP & 357WTQ🦍 •••• We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house! ••••• Message us on any of our social media accounts 📲or💬 407.334.3419 📧BTuned.sales@gmail.com by @btunedperformance

Download All

Save the photos and videos currently loaded on this page.

0Photos
0Videos
Ready to download 0 / 0

Keep this tab open until your download is ready.
back to up