Instagram story viewer> @craftercheese> Posts

CrafterCheese

@craftercheese

43

followers

359

following

canadian 🇨🇦
I'm a huge needy streamer overload fan

POSTS STORIES REELS TAGGED

did a test cut on scrap metal before using the proper clean sheet metal, during this the expandables ran out so i had to replace nozzle hardware and relaunch (what yellow warning on power supply meant btw). fixed then cut panels for the tube furnace. also fixed bandsaw so 1" steel extrusions can be cut. gotta bend the cut metal and add bolt holes next week/weld taken in Ontario, Canada by @craftercheese

4

0

17 days ago

50% sure i know what im doing, uh... i kinda lost the plot ngl, dilluted 20ml of 96% pure sulphuric acid to 0.96%, then boom boom pow i got stuff to put on rocks or sm 👍

#idk #chemistrylab taken in Ontario, Canada by @craftercheese

4

0

a month ago

Finished buying everything at popup store, officially 280$ cad down lol. just walked around Toronto and took photos once finished taken in Toronto Canada by @craftercheese

11

0

4 months ago

Zzz popup in Toronto, so many cool items @zzz.official.en taken in Toronto, Ontario by @craftercheese

7

0

4 months ago

The finished hammer I made for my machining class taken in Ontario, Canada by @craftercheese

9

0

4 months ago

I was dumb, the code had the height offset for tool 34 on tool 33 and I crashed the machine lol, got it fixed and everything was okay, Coolio stuff taken in Ontario, Canada by @craftercheese

7

2

5 months ago

Machined hammer head, encountered a few issues:
My inserts were wearing fast so my friend Ako suggested I include thermal expansion, she was right, thermal expansion caused the material and tool holder to have a combined expansion of 0.15mm, the inserts rated a 0.25mm in steel however this caused it to machine 0.4mm, adjusting for thermal expansion have cleaner cuts and a better surface finish. Overall accuracy is 0.0575mm +- 0.01mm radially. by @craftercheese

6

0

5 months ago

Only broke one carbide tool but looks good, just have to mill the part and add threads. This assignment is taking a while lol taken in Ontario, Canada by @craftercheese

8

0

6 months ago

Took about 30 minutes to hacksaw the brass stock off my part lol, I just manually milled it flat afterwards since my cut was really really really bad haha taken in Ontario, Canada by @craftercheese

7

2

7 months ago

In the Amazon and doing random stuff by @craftercheese

8

0

7 months ago

Anodized aluminium, cleaned oxide layer in 0.75M NaOH and the acid etched in 1.35M sulphuric acid. Then dyed and sealed in boiling water. Used titanium as conductor for the aluminum part since it hardly reacts at this concentration. It was tricky because acid had to stay cool since the reaction is exothermic, but overall this was a really really cool project I'm happy to have gotten the chance to do. I should probably get to drawing again lol. taken in Canada by @craftercheese

7

0

7 months ago

#frierenartchallenge
Drew frieren looking up for funny. Tried to colour, but I suck, sooo this is what u get taken in Ontario, Canada by @craftercheese

18

0

10 months ago