Instagram story viewer> @dureincustomfab> Posts

Hunter Durein

@dureincustomfab

208

followers

143

following

Custom Fabrication and Mobile Welding. DM for quotes

POSTS STORIES REELS TAGGED

Download All

This project composed of a complete replacement of the trailer tongue as well as adding supports for a trailer box. Customer was rear ended and the original tongue was bent pretty bad. taken in Bluffdale, Utah by @dureincustomfab

14

0

5 months ago

Fab on site brackets for a hydraulic fluid tank. Customer had issues with the old brackets repeatedly snapping from rough road vibrations. I fabricated new support brackets out of 5/16 plate and solved that problem for him. taken in Riverton, Utah by @dureincustomfab

9

1

5 months ago

taken in Bluffdale, Utah by @dureincustomfab

34

5

5 months ago

Message me for all of your mobile welding and custom fabrication jobs! Serving all of salt lake county taken in Salt Lake City by @dureincustomfab

127

14

6 months ago

Mobile dump truck repair. Dump truck had multiple cracks through the crossmember and other locations. Gouged out the old cracked welds and laid new welds. Welded all of the cracked sections in the crossmember and added 1/4” plate over the main crossmember to reinforce it. Message me for all of your mobile welding needs. by @dureincustomfab

15

0

6 months ago

Quick and easy dump trailer repair. Cut out the old broken chain and replaced it with new 3/8” chain. Message me for any of your mobile welding needs. by @dureincustomfab

21

2

6 months ago

This was a job I did for my friends over at @fluxdefense. These are rails I fabricated on to a shipping container that fold down flat so the container can be shipped to trade shows. The rails work on a bolt hinge system and go up and down in a matter of minutes. I added floor supports so that we could add deck flooring. This container was used as flux’s SHOT show 2026 booth. I also built and attached a spiral staircase that can be removed and stored inside the container. The whole goal for this project was to add a second story to this shipping container yet still allow the container to be transported. Message me with all of your custom fabrication and welding projects. taken in Sandy, Utah by @dureincustomfab

32

7

8 months ago

Full exterior deck and stair rails custom fabricated to fit perfectly. I did this job back in November of 2025. Quick turn around time and incredible quality. Message me for all of your custom fabrication needs. taken in Bluffdale, Utah by @dureincustomfab

23

3

8 months ago

Custom makeup vanity I built for my girlfriend back in July of 2025. Made out of 2 inch square tube with 1/2 inch plywood inlay for the top. Spider webs made out of 1/8 inch round stock and tig filler rod. Large 4.5 foot by 2 foot drawer to fit everything she needs. Lace paint job and gothic brass handles to finish. Message me for all of your custom fabrication projects. by @dureincustomfab

25

12

8 months ago

On site gate repair I did a while back. The post was loose and the gate was sagging. The gate had been hit a few times causing it to bend. I cut out and replaced the bent section, fixed the loose post, welded a new gate latch and cane bolt on then painted the whole gate. Message me for any mobile welding repairs you may have. taken in Salt Lake City by @dureincustomfab

15

0

8 months ago

Custom seat brackets to fit an 83 Toyota bench seat into a 91 Chevy s10. Dm me for your custom fabrication projects by @dureincustomfab

16

0

2 years ago

Before and after. Customer hired someone who claimed they could replace the rusted out posts. They then hired me when it became obvious the first guy couldn’t do it right. taken in West Jordan, Utah by @dureincustomfab

23

1

2 years ago