Instagram story viewer> @flechaperformance> Posts
Flecha Performance LLC(@flechaperformance)'s profile avatar HD Profile

Flecha Performance LLC

@flechaperformance

6.9K
followers
976
following
Custom ECU Calibration
Factory & Standalone ECU Tuning
EcuTek • UpRev • HP Tuners • COBB
MHD • Simos • More Platforms
📍 Florida | 🌎 Remote
POSTS STORIES REELS TAGGED
Words cannot describe the feeling we experienced on this event… We came to the @fl2k with no expectations being our first event with this car. Even though we know how consistent this car always is when we test it we experienced some issues on the qualifying rounds…. We were wheel hopping to the point that the tires were coming of the ground 😂 “will upload a video later of that” we were not looking for better numbers or PBs we just wanted the car to be consistent and i think we did a pretty good job with it…. Thursday… After the first round of qualy car needed a bigger coolant reservoir even tough car wasnt spilling coolant outside the system for safety mesasures we decided to skip the second round of qualy to have the car ready for the next day with another reservoir. Friday… Third round of qualy we had the issues with the wheel hop on that pass. after looking the suspension setup for a while we found finally found the issue! Saturday… Fourth round of qualy car was finally running as usual on testing we went 10.0@144mph we classified on the stick shift sport class. On the first round of eliminations we got a bye run. Sunday… Second round of eliminations got the win with a 9.9 vs a honda civic. Third round of eliminations “Semi Finals” got the win vs a mustang. And yes our first event and we got to the finals… Final Round vs an 8 second honda that seems to had issues on the qualy rounds and classified on the sports class not on the street class. We slept on the light and got sand bagged 😂… WE GOT THE 2nd PLACE!!! It was a crazy weekend for sure. We learned a lot me as a tuner and us as a team. This is not over we are just starting!!! Thanks to @sw_florida_z @brauliofdz_ @_any.m @_kevinvq @ofdrive and TONY to make this happen! Special thanks to @kyle_tidperformance @silva350z and their awesome team for the tips on the event! taken in Bradenton Motorsports Park by @flechaperformance
11
11 days ago
Download
From Naturally Aspirated To Boosted Supercharged! This customer went from running 11.3@119mph all motor as the fastest no-nitro VQ, To now holding the title of fastest VQ supercharged in the world with a 9.8@146mph the 1/4 mile 🏆🔥 Next step? Low 9’s with the blower setup. And we’ll be right there dialing it in every step of the way. 💪 Now we can push the car further with the studs and aftermarket headgaskets. Yes we ran 9’s with head bolts and oem gaskets… 🤷🏻‍♂️ Always thankful with @ofdrive and wife for trusting my tuning business. Flecha Performance tuned. No dyno queen or draggy queen just real results on a timeslip. Give us a follow if you like our tuning content! @sohomotorsports SC A2A @xpressinjectorsolutions 1650cc #FlechaPerformance #VQPower #SuperchargedVQ #WorldRecordVQ #QuarterMile #AllMotorToBoosted #RaceProven #FPtuned by @flechaperformance
33
a year ago
Download
@ofdrive's 350z 9's record pass 🏁 Double Tap • Check him out 🤙 @flechaperformance 👨‍💻 . . #vq37 #vqnation #nissan #350 #nissan350z #nismo #dragracing #reels #vqnation #hr35 #350zhr #jdm #60roll #40roll #1320video #1320 by @flechaperformance
67
2 years ago
Download
SATURDAY SCHEDULE — SHIFTED SOCIETY ROLL RACE SHOWDOWN. Here’s the official schedule for this Saturday at Orlando Speed World: 3:00 PM — Gates Open 3:30 PM — Inspection Begins 5:00 PM — Open Roll Racing 11:00 PM — Lanes Closed 12:00 AM — Track Close Come early, get through inspection, check out the vendors, hang out with the community, and get ready for a full night of roll racing. 📍 Orlando Speed World Dragway 📅 Saturday, October 17 See you at the track. 🏁 #ShiftedSociety #RollRacing #OrlandoSpeedWorld #DragRacing #OrlandoCars taken in Orlando Speed World Dragway by @flechaperformance
1
2 days ago
Download
🔥 FLORIDA, WE’RE COMING BACK! 🔥 JV PERFORMANCE | DYNO TUNING EVENT 📍 BCM Garage – Florida 📅 October 16, 2026 We’re heading back to Florida for an exclusive Dyno Tuning Day! This event will be STRICTLY DYNO TUNING ONLY, allowing us to focus on extracting the most out of every setup with precision and proven calibration strategies. 🏁 OCTOBER 17 – SHIFTSOCIETY ROLL RACE Taking your car to the ShiftSociety Roll Race the following day? We’ve got you covered! 💪 JV Performance will be providing FREE trackside tuning support to our customers participating in the event. ✅ Custom Dyno Tuning – October 16 ✅ FREE Track Support for our customers – October 17 ⚠️ LIMITED SLOTS AVAILABLE! 📩 DM us now to reserve your spot. From the dyno to the track. We don’t just tune cars. We back them up where it matters. 🏁 #JVPerformance #FloridaDynoDay #BCMGarage #ShiftSociety #DynoTuning TrackSupport -——--—-——————————-———————————— 🔥 ¡FLORIDA, REGRESAMOS! 🔥 JV PERFORMANCE | DYNO TUNING EVENT 📍 BCM Garage – Florida 📅 16 de octubre de 2026 ¡Regresamos a Florida para un día exclusivo de programación en Dyno! En esta ocasión estaremos trabajando ÚNICAMENTE EN DYNO, dedicando el tiempo necesario a cada vehículo para lograr una calibración precisa y aprovechar al máximo el potencial de cada setup. 🏁 17 DE OCTUBRE – SHIFTSOCIETY ROLL RACE ¿Vas a participar en el Roll Race de ShiftSociety al día siguiente? ¡Tenemos algo para ti! 💪 Estaremos ofreciendo TRACK SUPPORT completamente GRATIS a nuestros clientes que participen en el evento. ✅ Custom Dyno Tuning – 16 de octubre ✅ Track Support GRATIS para nuestros clientes – 17 de octubre ⚠️ ¡ESPACIOS LIMITADOS! 📩 Escríbenos por DM para reservar tu espacio. Del Dyno a la pista. No solamente programamos tu vehículo, también estamos contigo donde realmente se ponen a prueba los resultados. 🏁 JVPerformance FloridaDynoDay BCMGarage ShiftSociety DynoTuning TrackSupport by @flechaperformance
4
4 days ago
Download
🦾🦾 by @flechaperformance
2
11 days ago
Download
Guardadito por un tiempo… Mejores cosas vendrán❤️‍🩹 • • • • • Edit by: @rafa_elandresss 🙂‍↕️ by @flechaperformance
1
20 days ago
Download
En DynoHouse por primera vez en PR @flechaperformance dando su servicio de tunnig a @z.drift.lab para los futuros eventos de Drift que se aproximan. #turbo #350z #drift #viral #dyno by @flechaperformance
8
21 days ago
Download
Blessed to be on this journey. Don’t stop until you’re a legend. . . . . . . #dyno #turbo #350z #blessed #driftcar taken in Dyno House by @flechaperformance
3
24 days ago
Download
Infiniti Q50 VQ37VHR One of our customers going back 4–5 years came back to us after making some major changes to his Q50 following a previous water-meth system failure. Build… • Rear-mount turbo setup • Comp Turbo oil-less • Forged pistons & rods • JWT exhaust cams • Xpress injectors • Fuel return system • DeatschWerks fuel pump • Flex-fuel sensor All mechanical work and engine assembly were performed by Quality Auto in Cayey, PR. The entire setup is controlled through EcuTek, including boost control, fueling, flex-fuel calibration, and safety strategies/failsafes. On E60, the car peaked at 16 PSI and reached the customer’s goal of 700 WHP without pushing the combination further. There is definitely more power available, but there was no reason to chase a higher number. Final numbers were 722whp/566tq And yes — this is a daily-driven Q50. The goal was simple: build a reliable, street-driven combination that could make the power the customer wanted while maintaining proper control and safety. Custom calibration by Flecha Performance #q50 #q60 #vqsociety by @flechaperformance
8
24 days ago
Download
C6 CHILI 🌶️ 2005 Corvette C6 Built LS2 Follow the build → @c6_chili taken in Dyno House by @flechaperformance
1
25 days ago
Download
This MK7.5 Golf R came to us with: • Precision Stage 2 bolt-on turbo • Custom intake • APR downpipe • MPI + Flex Fuel • Upgraded intercooler • Full exhaust • Stock charge pipes • Stock long block Current results: E28 — 527 WHP / 446 WTQ E60 — 574 WHP / 499 WTQ All the mechanical work was performed by the owner of the vehicle on his business @alexisautoworks These are not the final numbers. We’re currently limited by the DQ381 TCM definition, which is still being developed. We’re missing approximately 500–600 RPM in the usable range for this turbo, and we also want to bring the mid-range torque down slightly as we continue refining the calibration. The goal is to properly optimize the powerband and keep the torque delivery where we want it before pushing the combination further. Yes, 600 WHP is within the target for this stock-long-block setup, but we’re taking the time to finish the TCM side properly before going after the final numbers. DQ381 — 14XX More testing and development coming. Tuned by Flecha Performance Simos Tools / SwitchPatch by @flechaperformance
40
25 days ago
Download

Download All

Save the photos and videos currently loaded on this page.

0Photos
0Videos
Ready to download 0 / 0

Keep this tab open until your download is ready.
back to up