Instagram story viewer> @jakejohnsoncleans> Posts

jakejohnsoncleans

@jakejohnsoncleans

704.1K

followers

0

following

🇺🇸The absolute best solution for mold I know💗
NOW ON Amazon!
Click below❤️👇

POSTS STORIES REELS TAGGED

If mold keeps coming back around your bathtub faucet or spout, it’s usually this:

1️⃣ You wipe the tub but never dry the gap where the spout meets the wall
2️⃣ You let water sit in the corners and around the handles after every shower
3️⃣ You only notice once there’s dark buildup creeping out from behind the fixture

Wiping the tub only handles the surface, the root stays hidden in the seal.

MoldMojo gets INTO the seal and kills it at the root. Spread the gel, walk away, wipe it off. That’s it.

This is the first thing that’s actually kept my tub clear for good.

👉 Amazon link’s in my bio, grab it before it spreads behind the wall.

#Moldmojopartner #syntheticperformer #usa #ad #mold by @jakejohnsoncleans

405

54

6 days ago

If mold keeps coming back behind your toilet, it’s usually this:

1️⃣ You clean the bowl but never wipe the floor where the base meets the tile
2️⃣ You let drips and splashes sit around the base without drying them
3️⃣ You only notice once there’s dark buildup creeping out from under the toilet

Toilet cleaner only handles the bowl, the root stays hidden in the seal at the base.

MoldMojo gets INTO the seal and kills it at the root. Spread the gel, walk away, wipe it off. That’s it.

This is the first thing that’s actually kept my bathroom floor clear for good.

👉 Amazon link’s in my bio, grab it before it spreads across the whole floor.

#Moldmojopartner #syntheticperformer #usa #ad #mold by @jakejohnsoncleans

392

151

6 days ago

If mold keeps coming back on your bathroom ceiling corners, it’s usually this:

1️⃣ You take long hot showers with the fan off or the door shut
2️⃣ You never wipe down the corners where steam collects and condenses
3️⃣ You paint over the dark spots instead of dealing with what’s underneath

Painting and wiping only hide the surface, the root stays hidden in the seal.

MoldMojo gets INTO the seal and kills it at the root. Spread the gel, walk away, wipe it off. That’s it.

This is the first thing that’s actually kept my ceiling clear for good.

👉 Amazon link’s in my bio, grab it before it spreads across the whole ceiling.

#Moldmojopartner #syntheticperformer #usa #ad #mold by @jakejohnsoncleans

4k

1k

7 days ago

If your bathroom grout keeps turning dark no matter how much you scrub, it’s usually this:

1️⃣ You scrub it but never let it fully dry afterward
2️⃣ You use the same harsh cleaner every time and it never reaches below the surface
3️⃣ You ignore the grout lines near the floor where water splashes the most

Scrubbing only cleans the top layer, the root is already growing deeper in the grout and seal.

MoldMojo gets INTO the seal and kills it at the root. Spread the gel, walk away, wipe it off. That’s the whole process.

This is the first thing that’s actually stopped it from coming back for me.

👉 Amazon link’s in my bio, grab it before it spreads across the whole floor.

#Moldmojopartner #syntheticperformer #usa #ad #mold by @jakejohnsoncleans

659

120

9 days ago

If mold keeps showing up on your window AC unit, it’s usually this:

1️⃣ You run it all summer but never clean the filter or coils
2️⃣ You leave it in the window through humid nights without running it at all
3️⃣ You only notice once there’s a musty smell blowing through the room

Wiping the front grille does nothing — the root is already growing in the coils and drip pan.

MoldMojo gets INTO the seal and kills it at the source. Spread the gel, walk away, wipe it off. That’s the whole thing.

This is the first thing that’s actually kept my unit clear for good.

👉 Amazon link’s in my bio — grab it before it spreads through the whole unit.

#Moldmojopartner #syntheticperformer #usa #mold by @jakejohnsoncleans

53

31

11 days ago

If mold keeps showing up on your baseboards, it’s not random — it’s this:

1️⃣ You mop the floor but never actually dry along the edges
2️⃣ You push furniture flush against the wall, trapping moisture with zero airflow
3️⃣ You wipe the visible mold but never check behind the baseboard itself

Mopping just pushes water right into the gap where it’s already growing.

MoldMojo gets INTO the seal and kills it at the source. Spread the gel, walk away, wipe it off. Done.

This is the first thing that’s actually kept my baseboards clear for good.

👉 Amazon link’s in my bio — grab it before it creeps along the whole wall.

#Moldmojopartner #syntheticperformer #usa #ad #mold by @jakejohnsoncleans

382

74

15 days ago

If mold keeps showing up around your dishwasher door seal, it’s usually this:

1️⃣ You close the door right after a cycle, trapping steam inside
2️⃣ You never wipe the rubber gasket, just the dishes that come out
3️⃣ You only run it every few days, letting moisture sit in between

Wiping the outside does nothing — the root is already growing in the gasket itself.

MoldMojo gets INTO the seal and kills it at the source. Spread the gel, walk away, wipe it off. That’s it.

This is the first thing that’s actually kept my dishwasher seal clear for good.

👉 Amazon link’s in my bio — grab it before it spreads further.

#Moldmojopartner #syntheticperformer #usa #mold by @jakejohnsoncleans

647

211

16 days ago

That mold along your closet wall isn’t just “bad luck” — it’s usually this:

1️⃣ You keep clothes packed tight against the wall with zero airflow
2️⃣ You never crack the door open to let it breathe out
3️⃣ You store damp shoes or laundry in there without thinking twice

Surface wipes don’t touch what’s already growing behind the drywall or baseboard.

MoldMojo gets into the seal and kills it at the root. Spread it, walk away, wipe it off. Done.

Honestly the first thing that’s actually kept my closet wall clear.

👉 Bio link — go grab it before it spreads further in there.

#Moldmojopartner #syntheticperformer #usa #mold by @jakejohnsoncleans

4k

533

17 days ago

That mold on your bathroom door frame isn’t random — it’s usually this:

1️⃣ You shower with the door shut, trapping all the steam right against it
2️⃣ You never wipe down the bottom edge where moisture actually pools
3️⃣ You paint over the discoloration instead of dealing with what’s underneath

Surface cleaning doesn’t touch what’s already growing in the wood grain or seal.

MoldMojo gets into the seal and kills it at the root. Spread it, walk away, wipe it off. Done.

Honestly the first fix that’s actually worked instead of just covering it up.

👉 Bio link — go grab it before it spreads down the frame.

#Moldmojopartner #syntheticperformer #usa #ad #mold by @jakejohnsoncleans

411

5

21 days ago

That mold under your kitchen sink keeps coming back for a reason:

1️⃣ You clean up leaks but never actually let the cabinet fully dry out
2️⃣ You store sponges and rags in there where moisture just sits
3️⃣ You only check it when something starts smelling off

Sprays and wipes handle what you can see — the root stays hidden in the seal and just regrows.

MoldMojo actually gets in there and kills it at the source. Spread the gel, walk away, wipe it off.

This is the first thing that’s actually solved it for me instead of just masking it.

👉 Bio link — grab it before it spreads further under there.

#Moldmojopartner #syntheticperformer #usa #mold by @jakejohnsoncleans

22k

4k

24 days ago

Mold keeps coming back? It’s probably one of these 3 things:
1️⃣ You shut the fan off way too early
2️⃣ You clean it once and think it’s handled
3️⃣ You ignore the smell since there’s no visible spots yet
Here’s the problem — normal cleaners only hit the surface. The root stays untouched, and it just grows back.
MoldMojo is different. It gets INTO the seal and kills it at the root. Spread the gel, walk away, wipe it off.
Honestly the easiest fix I’ve found for this.
👉 Bio link — go get it before it comes back again.
#Moldmojopartner #syntheticperformer #usa #mold by @jakejohnsoncleans

40k

3k

a month ago

Mold keeps coming back? It’s probably one of these 3 things:
1️⃣ You shut the fan off way too early
2️⃣ You clean it once and think it’s handled
3️⃣ You ignore the smell since there’s no visible spots yet
Here’s the problem — normal cleaners only hit the surface. The root stays untouched, and it just grows back.
MoldMojo is different. It gets INTO the seal and kills it at the root. Spread the gel, walk away, wipe it off.
Honestly the easiest fix I’ve found for this.
👉 Bio link — go get it before it comes back again.
#Moldmojopartner #syntheticperformer #usa #mold by @jakejohnsoncleans

5k

280

a month ago