2 days agorobsimmons93
Major issue with the length of wire runs and Baseline. Look up specs with 14g wire
a month agojdaybarra
I keep 20 feet of wire on my truck for this reason. Disconnect the wires in valves. Take your spare wire hook up to power wire going in. Take other end of wire hook up to decoder turn on valve at timer. Work your way down the line till one doesn’t turn on that’s your problem. Also always change out the solenoid with the decoder and put a month and year on your decoder
a month agogunnin_n_runnin
Baseline will provide a message detailing the exact type of two-wire fault and is easily diagnosed using a milliamp clamp meter which eliminates the need to break splices and cut out bicoders… pretty easy!
a month agoblacky_121605
Baseline is okay it's like an advanced logic Plus. But the message is on the screen definitely should have told you where your faulty decoder was. BL3200 is a decent controller but would not purchase again or sell to a property
a month agojasen_yordy
Do you have to cut the 2 wire or just the decoders to do the samething? Or can you do an ohms test on each decoder? There isnt very much 2 wire systems in my area.
a month agoihatewatson_13
One thing I hate about most 2 wire systems . One bad decoder the whole system suffers more often than not . Just wait till you work on torro’s two wire controllers .
More posts
