Instagram story viewer> @extrudr> Tagged

extrudr

@extrudr

14.3K

followers

550

following

High-Quality Filament for Your 3D Prints
📍 Made in Austria since 2014
Shop, Print & Explore →

POSTS STORIES REELS TAGGED

5k

28

The Honey shelf system - completely modular and scalable!

With the use of 3D printed connectors it is now very easy to build a stunning shelf which perfectly suits your needs.
From a small lowboard to a ceiling-high room separator everything is possible. Even a single hexagon can be build.

Besides the form factor and size you can also choose the color for the wood boards you like. The fasteners and rods are great for an accent color.

A complete build instruction and the files for the connectors are available on @thangs3d
Link in bio.

Sponsored | For 3D printing the connector we recommend using some higher grade filament like for example @extrudr Greentec Pro CF or DuraPro PA12 which we used in this build.

Happy printing!

8k

67

3D printed Spiral Vase, designed in #Fusion360 a while ago. Now also available in my Etsy shop + the 3D model is available on @cults3d, in case you would like to print one yourself 😁.

Swipe 👈 to see more.
---------------
💡 3D model designed in @adskfusion360
🖨️ 3D Printer: #Prusa i3 mk3s by @josefprusa
💨 Air filter: #Zimpure 2 by @zimple3d
✒️ Nozzle: 0.4mm @zodiacnozzle v6
🔧 Slicer: #Cura 4.8.0
📏 Layer height: 0.2mm
⏲️ Print time: 6 hours
🚀 Print speed: 45 mm/sec
🧵 Filament: BioFusion Quicksilver by @extrudr
📦 Dimensions: 13 x 20.5 cm (Diameter x Height)
📸 Camera: EOS2000D by @canonnederland
---------------
#3dprinting #3dprinter #3dprinted #spiralvase #vasemode #3dprint #silver #extrudr #decorationvase #vase #vases #decoration #modern #zodiacnozzle #silvervase #DIY #fusion360 #cults3d #slimprint #etsy 3D Printed Spiral Vase by Slimprint using Biofusion Quicksilver

349

16

Did I ever mentioned I'm crazy about carbon filament? Well I am.. look at that surface finish.

This is @extrudr Greentec pro carbon..
Interesting stuff... I think it is based on PLA. It prints as easy, but the properties are nothing alike (if the datasheet is correct ;) ).

It does need a 0.6mm nozzle..and yes it did clog my 0.4mm nozzle.

#carbon #3dprints #3dprinting #3dprint #3dprinted #makersgonnamake #smooth #surfacefinish

45

6

Regardez cette petite tortue 🤩 elle bouge et marché aussi comme support pour le tel !

Look at this turtle 🤩 it moves and also works as a phone stand!

✨✨✨✨✨✨
Do you wish to print something? DM me! 😌
Vous voulez imprimer quelque chose ? Envoyez moi un message !😌
✨✨✨✨✨✨

Design: https://cults3d.com/fr/modèle-3d/gadget/flexi-turtle
Créé par: KENDOFUJI

Filament: Amolen 3d silk gold and shiny purple PLA
Imprimante: Creality CR-10S pro v2

#3dprint #3dprinting #3dprinter #3dprinted #print3d #3dprintinglife #3dprints #3dprintable #3dprintedmodels #3dprintingservice #3dprinterworld #3dprintingnerd #3dprintingideas #3dprintedart #3dprintingcommunity #3dprinterfilament #3dprintedminiature #3dprintingmodel #3dprintart #turtle #3dturtle #3danimal #yoshi

250

6

Endlich: Futter für den Drucker😁
Heute ist passend zu meinem chinesischen 🇨🇳Weihnachtsgeschenk von gestern, schönes Filament von @extrudr aus Österreich 🇦🇹 eingetroffen 💪🏻 die erste Rolle musste sofort auf den Drucker! Das Wochenende kann kommen!!!

#futterfürdendrucker #filamentfriday #extrudr #3dprinted #3ddruck #3ddrucker #filament #daswochenendeistgerettet #workworkworkworkwork #3dprint #3dprinter #ender #ender3

122

0

Free STL-Files available!

Here you can find the STL Files for my designed two way screw.

https://www.thingiverse.com/thing:4734169

Have fun!

(Advertising by branding)

#thingiverse #thingiversemodel #fusion360 #3ddesign #3dprinting #3ddruck #3ddrucker #3dprint #stl3d #stl #extrudr #petg

294

5

A couple of 3D Printed Turbine Vases, designed in #Fusion360 and made from Glossy Silver & Matte Anthracite filaments ☘️

Before I printed the full size, I did a test print at 65% scale and made a timelapse video using @octoprint3d (Prusa). The final versions were printed on the CR10 S5 with DDS & Volcano Hotend 🌋

The model is now available on @myminifactory & @cults3d.

Swipe 👈🏻 to see more.
---------------
💡 3D model designed in @adskfusion360
🖨️ 3D Printer: Custom @creality3d CR10 S5
X @bondtech3d DDS + v6 Volcano HotEnd
✒️ Nozzle: 0.8mm volcano nozzle by @e3donline
🔧 Slicer: #Cura 4.8.0
📏 Layer height: 0.4mm (1mm thickness)
⏲️ Print time: 6 hours
🚀 Print speed: 45 mm/sec
🧵 Filament: BioFusion Quicksilver +
NX2 Anthracite by @extrudr
📦 Size: 11.6 x 25 cm (Diameter x height)
⚖️ Weight: 216 grams
📸 Camera: EOS2000D by @canonnederland
---------------
#3dprinting #3dprinter #3dprinted #turbinevase #vasemode #vases #driedflowervase #decorationvase #homedecor #interiordesign #extrudr #maker #cults3d #myminifactory #slimprint #silver #anthracite 3D Printed Turbine Vases, designed in Fusion360

288

13

For my son 😍

Filament: Extrudr Biofusion Blue Fire
Settings: 0.2mm / 30mm/s
Source: https://www.thingiverse.com/thing:2921038

#3dprinting #3dprint @extrudr #extrudr #extrudrbiofusion #filament #bluefire #fdm #3ddruck #thingiverse #3D #herrweber #switzerland #schweiz #elephant #PLA #toy

99

2

Let’s begin 2021 with this batch of filaments!
Guys from @extrudr were so kind to send over a bunch of their filaments to work with.

278

15

Releasing "Steinkauz" - light grey, matte texture - 3d printed clock 🐺😊

91

6

Neue Filament Lieferung von @extrudr 😍 PETG in Neonorange, PLA in anthrazit und TPU in schwarz (Shore 98A).
Alle drei Materialien funktionieren super 👍🏻
_____________

New filament from @extrudr just arrived 😍 PETG, PLA and TPU. Great printing results with these different materials 👍🏻

Unbezahlte #werbung #extrudr #filament #PETG #pla #tpu #3dprinting #material #diy #anycubici3mega #i3mega #fdm

17

0